This is a 5-day course designed and presented by Dr Maurice Stewart on how to design, select, specify, install, test and trouble-shoot your gas handling facilities.
This gas handling, conditioning and processing course has been attended by thousands of oil and gas professionals since Dr Maurice Stewart began teaching it more than 20 years ago. Dr Stewart is a co-author of a widely acclaimed “Surface Production Operations: Design of Gas Handling Facilities” along with Ken Arnold.
By attending this course, participants will:
1. Know the important parameters in designing, selecting, installing, operating and trouble-shooting gas handling, conditioning and processing facilities.
2. Understand the uncertainties and assumptions inherent in designing and operating the equipment in these systems and the limitations, advantages and disadvantages associated with their use.
3. Learn how to size, select, specify, operate, maintain, test and trouble-shoot surface equipment used with the handling, conditioning and processing of natural gas and associated liquids such as separators, heat exchangers, absorption and fractionation systems, dehydration systems, refrigeration, low temperature separation units, JT plants and compression systems.
4. Know how to evaluate and choose the correct process for a given situation.
In this 5-day course, Dr Maurice Stewart will cover the following topics:
• Fluid properties, basic gas laws and phase behaviour
• Well Configurations, surface safety systems (SSS) and emergency support systems (ESS)
• Gas Processing systems, selection and planning
• Water-hydrocarbon phase behaviour, hydrate formation prevention and inhibition
• Heat transfer theory and process heat duty
• Heat exchangers: configurations, selection and sizing
• Gas-liquid separation and factors affecting separation
• Types of separators and scrubbers, and their construction
• Gas-liquid separators and sizing
• Liquid-liquid separators and sizing
• Three phase separator sizing
• Pressure vessels: the internals, mechanical design and safety factors
• Separator operating problems and practical solutions
• Gas compression theory, compression ratio and number of stages
• Compressor selection: centrifugal compressors vs. reciprocating compressors
• Vapor recovery units, screw compressors and vane compressors
• Compression station design and safety systems
• Performance curves for reciprocating compressors
• Absorption process and absorbers
• Adsorption process and adsorbers
• Glycol gas dehydration unit design and operation
• Glycol unit operating variables and trouble shooting
• Glycol selection and glycol regeneration
• Acid gas sweetening processes and selection
• Fractionation, refrigeration plants, expander plants and J-T plants
• Process control and safety systems
Participants will receive the following course materials:
1. The 3rd Edition of Volume 2 of the widely acclaimed “Surface Production Operations: Design of Gas Handling Facilities” written by Ken Arnold and Dr Maurice Stewart. This textbook continues to be the standard for industry and has been used by thousands since its first printing over fifteen years ago.
2. A comprehensive set of lecture notes for after course reading and reference
3. An extensive set of practical in-class “case study” exercises developed by Dr Stewart that will be used to emphasize the design and “trouble-shooting” pitfalls often encountered in the industry.
Who Should Attend
• Facility engineers, production engineers, design and construction engineers, team leaders, operations engineers, maintenance team leaders/engineers and other personnel who are or will be responsible for the designing, selecting, sizing, specifying, installing, testing, operating and maintaining gas handling facilities, gas plant facilities and gas pipelines.
• Experienced professionals who want to review or broaden their understanding of gas handling, conditioning and processing facilities and gas pipeline operation and maintenance.
• Professionals with little to moderate experience with the handling or processing of natural gas and associated liquids.
If you like to receive a pdf file of this course outline, please contact us.
Course date: November 19-23, 2018
If you or your people want to attend this course, please register HERE.
LDI Training Pte Ltd
369 Holland Road #02-04